Publications

Below are some 140+ publications (full list here), and Google Scholar profile / Research Gate:

• • 2024 (2)
    • Machchhar RJ, Bertoni A, Wall J, Larsson T. Incorporating changeability for value-robust product-service systems: an integrative review. Design Science. 2024;10:e8. doi:10.1017/dsj.2024.5
    • Aeddula, O., Ruvald, R., Wall, J., Larsson, T. (2024) AI-Driven Comprehension of Autonomous Construction Equipment Behavior for Improved PSS Development. Decision Analytics and Service Science: Data-driven Services and Servitization in Manufacturing: Innovation, Engineering, Transformation, and Management, 2024, p. 1017-1026, HICSS 57. https://hdl.handle.net/10125/106500
  • 2023 (2)
    • Flyborg, J., Renvert, S., Anderberg, P., Larsson, T., Sanmartin-Berglund, J. (2023). Results of objective brushing data recorded from a powered toothbrush used by elderly individuals with mild cognitive impairment related to values for oral health. Clin Oral Invest 28, 8 (2024). https://doi.org/10.1007/s00784-023-05407-2
    • Machchhar, R., Aeddula, O., Bertoni, A., Wall, J., & Larsson, T. (2023). SUPPORTING CHANGEABILITY QUANTIFICATION IN PRODUCT-SERVICE SYSTEMS VIA CLUSTERING ALGORITHM. Proceedings of the Design Society,3, 3225-3234. doi:1017/pds.2023.323
  • 2022 (4)
    • Bertoni, A., R.J. Machchhar, T. Larsson, B. Frank (2022). Digital Twins of Operational Scenarios in Mining for Design of Customized Product-Service Systems Solutions. Procedia CIRP, Volume 109, 2022, Pages 532-537, ISSN 2212-8271, https://doi.org/10.1016/j.procir.2022.05.290.
    • Yan, Z., Larsson, T., & Larsson, A. (2022). PSS Value Transformation: From Mass-Manufactured Vehicles to Provision of Mass-Customized Services – A Case Study of Designing and Prototyping Customized Digital Services for SAIC Motor in China. Proceedings of the Design Society,2, 1179-1188. doi:10.1017/pds.2022.120. (Reviewers favourite award)
  • 2021 (7)
    • Aeddula, Omsri Kumar, Flyborg, T. Larsson, P. Anderberg, J. Sanmartin Berglund, S. Renvert. 2021. A Solution with Bluetooth Low Energy Technology to Support Oral HealthCare Decisions for Improving Oral Hygiene. In 2021 5th International Conference on Medical and Health Informatics (ICMHI 2021). Association for Computing Machinery, New York, NY, USA, 134–139. DOI:https://doi.org/10.1145/3472813.3473179
    • Zhang, Y., T. Larsson, A. Larsson. (2021). Chinese Product-Service System Innovations Enabled via Governmental Policies: The E-Scooter Case. In: Proceedings of Design Society 2021, Cambridge University Press, 2021, Vol. 1, 611-620.
    • Ruvald, R., C. Johansson Askling, A. Bertoni, T. Larsson (2021). EVALUATING PROTOTYPING SUPPORT IN EARLY TRANSFORMATIVE PSS DESIGN. In: Proceedings of Design Society 2021, Cambridge University Press, 2021, Vol. 1, p. 1411-1420.
    • Elfsberg, J., T. Larsson, C. Johansson Askling, A. Larsson (2021). How Covid-19 Enabled a Global Student Design Team to Achieve Breakthrough Innovation. In: Proceedings of Design Society 2021, Cambridge University Press, 2021, Vol. 1, p. 1705-1
    • Aeddula, O., Wall, J. & Larsson, T. (2021). Artificial Neural Networks Supporting Cause and Effect Studies in Product-Service System Development. In: Chakrabarti, A., Poovaiah, R., Bokil, P., Kant, V. (Eds.) (Ed.), Design for Tomorrow—Volume 1: Proceedings of ICoRD 2021. Paper presented at 8th International Conference on Research Into Design (ICoRD’ 21) 7-10 January 2021, IIT, Bombay, India. , I, Article ID 132.
    • Gaiardelli, P., Pezzotta, G., Rondini, A. et al. (2021). Product-service systems evolution in the era of Industry 4.0.” Serv Bus 15, 177–207 (2021). https://doi.org/10.1007/s11628-021-00438-9
    • Tatipala, S., Larsson, T., Johansson, C., Wall, J., (2021). The influence of industry 4.0 on product design and development: Conceptual foundations and literature review. In Proceedings of 8th International Conference on Research Into Design (ICoRD’ 21).
  • 2020 (7)
    • Lugnet, Johan; Ericson, Åsa; Larsson, Tobias. (2020). Design of Product–Service Systems: Toward an Updated Discourse. Systems8, no. 4: 45.
    • Tatipala, S., Wall, J., Larsson, T., Johansson, C., & Sigvant, M. (2020). Towards Improving Process Control in Sheet Metal Forming: A Hybrid Data-and Model-Based Approach. In Proceedings of the Swedish Production Symposium (Vol. 13, pp. 367–377). https://doi.org/10.3233/ATDE200174
    • Jagtap, S., T. Larsson (2020) Designing integrated solutions for resource-limited societies. Research & Education in Design: People & Processes & Products & Philosophy.
    • Wall, J., M. Bertoni, T. Larsson (2020). The Model-Driven Decision Arena: Augmented Decision-Making for Product-Service Systems Design, Systems 8 (2), 22
    • Chowdhery, A.S., M. Bertoni, J. Wall, T. Larsson (2020). A data-driven design framework for early stage PSS design exploration, In: Design Science, ISSN 2053-4701.
    • Wall. J., O.K. Aeddula, T. Larsson (2020. DATA ANALYSIS METHOD SUPPORTING CAUSE AND EFFECT STUDIES IN PRODUCT-SERVICE SYSTEM DEVELOPMENT, Proceedings of the Design Society: DESIGN Conference 1, 461-470.
    • Tatipala, S.; Wall, J.; Johansson, C.; Larsson, T. (2020). ”A Hybrid Data-Based and Model-Based Approach to Process Monitoring and Control in Sheet Metal Forming”. Processes 2020, 8, 89.
  • 2019 (2)
    • Jagtap, S., T. Larsson, (2019), “Resource-Limited Societies, Integrated Design Solutions, and Stakeholder Input”, She Ji: The Journal of Design, Economics, and Innovation, Volume 5, Issue 4,2019, Pages 285-303, ISSN 2405-8726, https://doi.org/10.1016/j.sheji.2019.10.001.
    • Eivazzadeh S, Fiedler M, Berglund JS, Anderberg P, Larsson TC (2019) Design of a Semi-Automated and Continuous Evaluation System: Customized for Application in e-Health.
  • 2018 (4)
    • Eivazzadeh S, Berglund JS, Larsson TC, Fiedler M, Anderberg P (2018) Most Influential Qualities in Creating Satisfaction Among the Users of Health Information Systems: Study in Seven European Union Countries, JMIR Med Inform 2018;6(4):e11252, DOI: 10.2196/11252
    • Wall, J., M. Bertoni, T. Larsson (2018). A model-driven decision arena: Augmenting decision making in early design. In: Norddesign conference proceedings, The Design Society, 2018
    • Ruvald, R. M. Frank, C. Johansson, T. Larsson. (2018). Data Mining through Early Experience Prototyping: A step towards Data Driven Product Service System Design, Preprints of the 16th IFAC Symposium on Information Control Problems in Manufacturing Bergamo, Italy. June 11-13, 2018.
    • Jagtap, S., T. Larsson (2018). Design and Frugal Innovations: Three roles of resource-poor people. In: Proceedings of the International Design Conference / [ed] D. Marjanović, M. Štorga, S. Škec, N. Bojčetić, N. Pavković (eds.), The Design Society, 2018, p. 2657-2668, https://doi.org/10.21278/idc.2018.0152
  • 2017 (8)
    • Exploration of Simulation-Driven Support Tools for Sustainable Product Development, Procedia CIRP, Volume 64, 2017, Pages 271–276, https://doi.org/10.1016/j.procir.2017.03.069
    • Panarotto, M., J. Wall, T. Larsson (2017), Simulation-driven Design for Assessing Strategic Decisions in the Conceptual Design of Circular PSS Business Models, Procedia CIRP, Volume 64, 2017, Pages 25–30, https://doi.org/10.1016/j.procir.2017.03.026
    • Bertoni, A., T. Larsson (2017), Data Mining in Product Service Systems Design: Literature Review and Research Questions, Procedia CIRP, Volume 64, 2017, Pages 306–311, https://doi.org/10.1016/j.procir.2017.03.131
    • Johansson, C., T. Larsson, S. Tatiapala (2017), Product-Service Systems for Functional Offering of Automotive Fixtures: Using Design Automation as Enabler, Procedia CIRP, Volume 64, 2017, Pages 411–416, https://doi.org/10.1016/j.procir.2017.03.006
    • Panarotto, M., J. Wall, M. Bertoni, T. Larsson (2017), Value-driven simulation: thinking together through simulation in early engineering design, 21st International Conference on Engineering Design (ICED), Vancouver.
    • Bertoni, A., T. Larsson, J. Larsson, J. Elfsberg (2017), Mining data to design value: a demonstrator in early design, 21st International Conference on Engineering Design (ICED), Vancouver.
    • Broman, G., K-H. Robèrt, T. J. Collins, G. Basile, R. J. Baumgartner, T. Larsson, D. Huisingh. (eds.) (2017). Science in support of systematic leadership towards sustainability, Journal of Cleaner Production, Volume 140, Part 1, 1 January 2017, Pages 1–9, https://doi.org/10.1016/j.jclepro.2016.09.085
    • Nurhadi, L., S. Borén, H. Ny, T. Larsson. (2017). Competitiveness and sustainability effects of cars and their business models in Swedish small town regions, Journal of Cleaner Production, Volume 140, Part 1, 1 January 2017, Pages 333–348. http://dx.doi.org/10.1016/j.jclepro.2016.04.045
  • 2016 (6)
    • Bertoni, M., M. Panarotto, T. Larsson. (2016). Boundary objects for PSS Design, Procedia CIRP, Volume 47, 2016, Pages 329–334, http://dx.doi.org/10.1016/j.procir.2016.03.226
    • Johansson, C., J. Elfsberg, T. Larsson, M. Frank, L. Leifer, N. Nilsson, V. Söderberg. (2016). Urban Mining as a Case for PSS, Procedia CIRP, Product-Service Systems across Life Cycle, Volume 47, 2016, Pages 460-465. http://dx.doi.org/10.1016/j.procir.2016.03.089
    • Bertoni, A., C. Levandowski., O. Isaksson, T. Larsson. (2016). Virtual Modeling for Lifecycle Performance Assessment in Aerospace Design, Procedia CIRP, Product-Service Systems across Life Cycle, Volume 47, 2016, Pages 335–340. http://dx.doi.org/10.1016/j.procir.2016.03.219.
    • Bertoni, Alessandro, M. Bertoni, M. Panarotto, C. Johansson, T.C. Larsson. (2016). Value-driven product service systems development: Methods and industrial applications. CIRP Journal of Manufacturing Science and Technology. http://dx.doi.org/10.1016/j.cirpj.2016.04.008.
    • Eivazzadeh, S., P. Anderberg, T.C. Larsson, S.A. Fricker, J. Berglund (2016). Evaluating Health Information Systems Using Ontologies, JMIR Medical Informatics 4 (2), 1-30
    • Kianian, B., S. Tavassoli, T.C. Larsson and O. Diegel, (2016). The Adoption of Additive Manufacturing Technology in Sweden. 13th CIRP Global Conference on Sustainable Manufacturing-Decoupling Growth from Resource Use, September 16th-18th, 2015, Ho Chi Minh City & Binh Duong, Vietnam. DOI: https://doi.org/10.1016/j.procir.2016.01.036.
  • 2015 (7)
    • Benaim, A., Elfsberg, J., Larsson, T.C., Larsson, A., (2015). The Implementation of Innovation Metrics: A case study. Proceedings of the 20th International Conference on Engineering Design (ICED 15), July 27-30, 2015, Milan, Italy.
    • Kianian Babak, Tavassoli Sam, Larsson Tobias C., and Diegel Olaf (2015). The Adoption of Additive Manufacturing Technology in Sweden. 3D Printing and Additive Manufacturing. December 2015, 2(4): 152-158. https://doi.org/10.1089/3dp.2015.0013.
    • Kianian, B., T.C. Larsson (2015). Additive Manufacturing Technology Potential: A Cleaner Manufacturing Alternative. 20th Design for Manufacturing and the Life Cycle Conference (DFMLC). Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2015), August 2nd-5th, 2015, Boston, Massachusetts, USA.
    • Tavassoli, S., T.C. Larsson, B. Kianian, (2015). Manufacturing Renaissance: Return of manufacturing to western countries. In C. Karlsson, B. Johansson, & R. Stough, Innovation and Entrepreneurship in the Global Economy: Knowledge, Technology and Internationalization”, Edward Elgar Publishing.
    • Eivazzadeh, S., P. Anderberg, J. Berglund, T. Larsson (2015). Designing with Priorities and Thresholds for Health Care Heterogeneity: The Approach of Constructing Parametric Ontology. ICED 2015, Design for Life, Milan, Italy, 27-30 July, 2015.
    • Bertoni, A., M. Bertoni, M. Panarotto, C. Johansson, T. Larsson (2015). Expanding Value Driven Design to Meet Lean Product Service Development. 7th Industrial Product-Service Systems Conference – PSS, industry transformation for sustainability and business, May 21-22, 2015, Saint-Étienne, France. https://doi.org/10.1016/j.procir.2015.02.153
    • B. Kianian, S. Tavassoli, T.C. Larsson (2015). The Role of Additive Manufacturing Technology in job creation: an exploratory case study of suppliers of Additive Manufacturing in Sweden. 12th CIRP Global Conference on Sustainable Manufacturing – Emerging Potentials, September 22nd-24th, 2014, Johor Bahru, Malaysia. https://doi.org/10.1016/j.procir.2014.07.109
  • 2014 (2)
    • Benaim, A., T.C. Larsson, A. Larsson, J. Elfsberg (2014). Becoming an innovative company: Assessing an organization’s innovation capability from the perspective of a team. CINet, Budapest, 2014.
    • Benaim, A., T.C. Larsson, A. Larsson, J. Elfsberg (2014). Building a pathway for innovation -Lessons Learned from developing an online platform. NordDesign 2014, Eespo, Finland: Aalto University , 2014.
  • 2013 (4)
    • Broman G., Robèrt K-H., Basile G., Larsson T., Baumgartner R., Collins T. and Huisingh D., (2013). Systematic leadership towards sustainability, Journal of Cleaner Production, 2013. https://doi.org/10.1016/j.jclepro.2013.07.019
    • Panarotto, M., T. Larsson, A. Larsson. (2013). Enhancing supply chain collaboration in automotive industry by value driven simulation. 19th International Conference on Engineering Design (ICED13), 19-22 August, 2013, Seoul, Korea.
    • Hallstedt, S., T. Thompson, H. Ny, O. Isaksson, T. Larsson. (2013). A Decision Support Approach for Modeling Sustainability Consequences in an Aerospace Value Chain. IDETC/CIE 2013, August 5-9, Portland, US.
    • Kianian, B., T.C. Larsson, S. Tavassoli (2013). Manufacturing Renaissance: Return of manufacturing to western countries. International Conference on Sustainable Intelligent Manufacturing (SIM2013) at Lisbon, Portugal, from June 26 to June 29, 2013.
  • 2012 (6)
    • Motamediyan, F., A. Thompson, T. Larsson (2012). Impacts of project-overload on innovation inside organizations: Agent-based modeling.ICTI 2012: International Conference on Technology and Innovation, Venice, Italy, November 14-16, 2012.
    • Larsson, A., M. Bertoni, Å. Ericson, K. Chirumalla, T. Larsson, O. Isaksson, D. Randall. (2012). The Rise of Social Product Development. International Journal of Networking and Virtual Organisations, Vol.11, No.2, pp.188 – 207, DOI: http://dx.doi.org/10.1504/IJNVO.2012.048346.
    • Isaksson, O., T. Larsson, M. Kokkolaras, M. Bertoni. (2012). Simulation Driven Design for Product-Service Systems. 4th CIRP International Conference on Industrial Product Service Systems, Nov 8-9, 2012, Tokyo, Japan. THE PHILOSOPHER’S STONE FOR SUSTAINABILITY, 2013, 465-470, DOI: https://doi.org/10.1007/978-3-642-32847-3_78.
    • Panarotto, M., Å. Ericson, T. Larsson. (2012). Intangibles in design of PSS value proposition, 4th CIRP International Conference on Industrial Product Service Systems, Nov 8-9, 2012, Tokyo, Japan. THE PHILOSOPHER’S STONE FOR SUSTAINABILITY, 2013, 85-90, DOI: https://doi.org/10.1007/978-3-642-32847-3_14.
    • Nopparat, N., B. Kianian, A.W. Thompson, and T.C. Larsson. (2012). Resource Consumption in Additive Manufacturing with a PSS Approach, 4th CIRP International Conference on Industrial Product Service Systems, Nov 8-9, 2012, Tokyo, Japan. THE PHILOSOPHER’S STONE FOR SUSTAINABILITY, 2013, 357-362, DOI: https://doi.org/10.1007/978-3-642-32847-3_60.
    • Ericson, Å., T. Larsson, O. Isaksson, A. Larsson (2012). Revisiting the Research Field of Product-Service Systems Development. ASME 2012 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), August 12-15, 2012 in Chicago, IL. https://doi.org/10.1115/DETC2012-70779

• • 2011 (13)
    • Tretten, P., A. Gärling, R. Nilsson, T. Larsson (2011). An On-Road Study of Head-Up Display: Preferred Location and Acceptance Levels. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, September 2011 vol. 55 no. 1 1914-1918. doi: https://doi.org/10.1177/1071181311551398.
    • Panarotto, M., T. Larsson (2012). Towards Value Driven Simulation of Product-Service Systems – A Conceptual Scenario. 12th International Design Conference, DESIGN 2012, May 21st-24th, 2012, Dubrovnik, Croatia.
    • Sandberg, M., I. Tyapin, M. Kokkolaras, O. Isaksson, J-O. Aidanpää, T. Larsson (2011).  A Knowledge-based Master-model Approach with Application to Rotating Machinery Design.Concurrent Engineering 1063293X11424511, December 2011, vol. 19, no. 4, pp. 295-305, Doi: https://doi.org/10.1177/1063293X11424511.
    • Bertoni, M., C. Johansson, T. Larsson (2011). Methods and Tools for Knowledge Sharing in Product Development. In: Innovation in Product Design Eds. Monica Bordegoni, Caterina Rizzi. Springer, 2011, p. 37-53. DOI: https://doi.org/10.1007/978-0-85729-775-4_3.
    • Ericson, Å., A. Larsson, T. Larsson (2011). Expanding the social dimension: Towards a knowledge base for product-service innovation. 18th International Conference on Engineering Design, ICED’11, Copenhagen, Denmark, August 15-18, 2011.
    • Thompson, A., T. Larsson, G. Broman (2011). Towards sustainability-driven innovation through product-service systems. 3rd CIRP International Conference on Industrial Product Service Systems, IPS2 2011 – Functional thinking for value creation, Braunschweig, Germany, May 5-6, 2011, Springer. DOI: https://doi.org/10.1007/978-3-642-19689-8_22.
    • Andersson, P., O. Isaksson, T. Larsson (2011). A case study of how knowledge based engineering tools support experience re-use. 3rd International Conference on Research into Design, ICoRD’11, Indian Institute of Science, Bangalore, India, January 10-12, 2011.
    • Isaksson, O., T. Larsson, P. Johansson (2011). Towards a framework for developing product/service systems. 3rd CIRP International Conference on Industrial Product Service Systems, IPS2 2011 – Functional thinking for value creation, Braunschweig, Germany, May 5-6, 2011, Springer. DOI: https://doi.org/10.1007/978-3-642-19689-8_10.
    • Bertoni, A., O. Isaksson, M. Bertoni, T. Larsson (2011). Assessing the Value of Sub-System Technologies including Life Cycle Alternatives. Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, 2011, p. 669-674, Berlin, Germany, May 2nd – 4th, 2011, Springer.
    • Wallin, J., T. Larsson, O. Isaksson (2011). Measuring innovation capability – Assessing collaborative performance in product-service system innovation. Functional thinking for value creation: Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Technische Universität Braunschweig, Braunschweig, Germany, May 5th – 6th, 2011 / [ed] Jürgen Hesselbach; Christoph Herrmann, Berlin: Encyclopedia of Global Archaeology/Springer Verlag, 2011, p. 207-212. DOI: https://doi.org/10.1007/978-3-642-19689-8_37.
    • Sturm, D., V. Parida, T. Larsson, O. Isaksson (2011). Design of user-centred wireless sensor technology in sports – an empirical study of elite kayak athletes. 3rd International Conference on Research into Design, ICoRD’11, No 3,  Indian Institute of Science, Bangalore, India, January 10-12, 2011.
    • Chirumalla, K., A. Larsson, M. Bertoni, T. Larsson (2011). Knowledge Sharing Across Boundaries: Web 2.0 and Product-Service System Development. 3rd International Conference on Research into Design, ICoRD’11, No 3,  Indian Institute of Science, Bangalore, India, January 10-12, 2011.
    • Parida, V., T. Larsson, O. Isaksson, P. Oghazi (2011). Towards open innovation practices in aerospace industry : challenges and opportunities. 3rd International Conference on Research into Design, ICoRD’11, No 3,  Indian Institute of Science, Bangalore, India, January 10-12, 2011.
  • 2010 (6)
    • Larsson, A., Å. Ericson, T. Larsson, O. Isaksson, M. Bertoni (2010). Engineering 2.0 – Exploring Lightweight Technologies for the Virtual Enterprise. In: From CSCW to Web 2.0 : European Developments in Collaborative Design. eEds. David Randall ; Pascal Salembier. Springer, 2010. p. 173-191 (Computer Supported Cooperative Work). DOI: https://doi.org/10.1007/978-1-84882-965-7_9.
    • Kastensson, Å., A. Larsson, T. Larsson (2010). Embracing risk to pursue product innovation in automotive industry. 17th International Product Development Management Conference IPDM, Murcia, Spain, University of Murcia, June 13-15, 2010.
    • Wallin, J., O. Isaksson, A. Larsson, T. Larsson (2010). Measuring innovation capability in technology-focused development. 17th International Product Development Management Conference IPDM, Murcia, Spain, University of Murcia, June 13-15, 2010.
    • Ritzén, S., T. Larsson, F. Nilsson, B. Regnell (2010). MINT – Mätinspiration i innovativa team. In: Management of Innovation and Technology, ISSN 1102-5581, Vol. 17, no 3, p. 7-9, 2010.
    • Nybacka, M., Å. Ericson, T. Larsson (2010). Prospective service innovation in automotive testing – beyond distributed technology. In: International Journal of Technology Intelligence and Planning (IJTIP), ISSN 1740-2832, E-ISSN 1740-2840, Vol. 6, no 1, p. 14-31, 2010. DOI: https://doi.org/10.1504/IJTIP.2010.033921.
    • Wenngren, J., P. Thor, Å. Ericson, T. Larsson (2010). PSS innovation – Discussing knowledge based tools. Proceedings of 2nd CIRP IPS2 Conference 2010 – Industrial product-service systems -IPS², Linköping, Sweden, April 14-15, 2010.
  • 2009 (11)
    • Ericson, Å. and T. Larsson (2009). People, product and process perspectives on product/service-system development. Introduction to Product/Service-System Design. Eds. T. Sakao, M. Lindahl. London, Springer: 219-236. DOI: https://doi.org/10.1007/978-1-84882-909-1_11.
    • Hicks, B., A. Larsson, S. Culley, T. Larsson (2009). A methodology for evaluating technology readiness during product development. 17th International Conference on Engineering Design, ICED’09. Design Society. p. 3-157–3-168, Stanford University, California, USA, August 24-27, 2009.
    • Nergård, H., T. Larsson (2009). Challenges for experience feedback in engineering design. PIn: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009: DETC 2009, New York: American Society of Mechanical Engineers, 2010, Vol. 2, Part A, p. 835-842.
    • Isaksson, O., T. Larsson, A. Öhwrwall Rönnbäck (2009). Development of product-service systems: challenges and opportunities for the manufacturing firm. Journal of Engineering Design, 20:4, p 329 — 348, August 2009. DOI: https://doi.org/10.1080/09544820903152663.
    • Parida, V., C. Johansson, T. Larsson. (2009) Implementation of open innovation practices in Swedish manufacturing industry. In: Design has never been this cool: ICED 09, the 17th International Conference on Engineering Design ; 24 – 27 August 2009, Stanford University, Stanford, California, USA ; proceedings volume / [ed] Margareta Norell Bergendahl; Martin Grimheden; Larry Leifer, Glasgow: Design Research Society, 2009, Vol. 1: Design processes, p. 435-446.
    • Sundin, E., G. Ölundh Sandström, A. Öhrwall Rönnbäck, T. Sakao, T. Larsson. (2009) Challenges for Industrial Product/Service Systems – Experiences from a learning network of large companies. In: Industrial product-service systems (IPS2): proceedings of the 1st CIRP IPS2 Conference ; [01 – 02 April 2009, Cranfield University, UK] / [ed] Rajkumar Roy, Cranfield: Cranfield University Press , 2009.
    • Bertoni, Marco ; Ericson, Åsa ; Larsson, Tobias. (2009) Needs and requirements – how TRIZ may be applied in product-service development. In: Proceedings of the 2nd Nordic Conference on Product Lifecycle Management – NordPLM’09. Chalmers tekniska högskola. Institutionen för produkt- och produktionsutveckling, 2009.
    • Ericson, Åsa ; Müller, Patrick ; Larsson, Tobias ; Rainer, Stark. (2009) Product-service systems – from customer needs to requirements in early development phases. In: Industrial product-service systems (IPS2): proceedings of the 1st CIRP IPS2 Conference ; [01 – 02 April 2009, Cranfield University, UK] / [ed] Rajkumar Roy, Cranfield: Cranfield University Press , 2009.
    • Bertoni, Marco ; Larsson, Tobias (2009) Requirements for a KEE system supporting PSS development.. In: Research into design : supporting multiple facets of product development. Research Publishing Services, 2009. 10 p.
    • Nergård, Henrik ; Sandberg, Marcus ; Larsson, Tobias. (2009) Towards life-cycle awareness in decision support tools for engineering design. In: Design has never been this cool: ICED 09, the 17th International Conference on Engineering Design ; 24 – 27 August 2009, Stanford University, Stanford, California, USA ; proceedings volume / [ed] Margareta Norell Bergendahl, Glasgow: Design Research Society, 2009, p. 23-30.
    • Sandberg, Marcus ; Kokkolaras, Michael ; Aidanpää, Jan-Olov ; Isaksson, Ola ; Larsson, Tobias. (2009) A master-model approach to whole jet engine analysis and design optimization. Conference: WCSMO-8, 8th World Congress on Structural and Multidisciplinary Optimization, No. 8, Lisbon, Portugal, June 1, 2009 – June 5, 2009.
  • 2008 (11)
    • Bertoni, Marco ; Johansson, Christian ; Larsson, Tobias ; Isaksson, Ola (2008) A methodology for KEE systems target cascading. In: Tools and methods of competitive engineering : proceedings of the seventh international symposium on tools and methods of competitive engineering – TMCE 2008. Delft : Delft university of technology, 2008. 10 p.
    • Larsson, Tobias ; Larsson, Andreas (2008) Design for wellbeing. In: The Engineering Handbook of Smart Technology for Aging, Disability and Independence. / ed. Abdelsalam Helal ; Mounir Mokhtari ; Bessam Abdulrazak. Hoboken, N.J : Wiley, 2008. p. 819-832
    • Larsson, Andreas ; Ericson, Åsa ; Larsson, Tobias ; Randall, Dave (2008) Engineering 2.0 – exploring lightweight technologies for the virtual enterprise. In: Proceedings of the 8th International Conference on the Design of Cooperative Systems, COOP 08 : Carry-le-Rouet, Provence, France, May 20-23, 2008. 2008. 12 p.
    • Johansson, Christian ; Larsson, Andreas ; Larsson, Tobias ; Isaksson, Ola. (2008) Gated maturity assessment – supporting gate review decision documents with maturity of knowledge assessment. In: CIRP Design Conference 2008: April 7 – 9, 2008, Enschede / [ed] Fred J. A. M. van Houten, Enschede: Laboratory of Design, Production and Management, Faculty of Engineering Technology, Univ. of Twente , 2008.
    • Ny, Henrik ; Thompson, Anthony ; Lindahl, Pia ; Broman, Göran ; Isaksson, Ola ; Carlson, Raul ; Larsson, Tobias ; Robèrt, Karl-Henrik ; Broman, Göran. (2008) Introducing strategic decision support systems for sustainable product-service development across value chains. Conference: Sustainable Innovation ’08. Future Products, Technologies and Industries, Malmö, Sweden, October 27, 2008 – October 28, 2008.
    • Sandberg, Marcus ; Johnsson, Helena ; Larsson, Tobias. (2008) Knowledge-based engineering in construction – the prefabricated timber housing case. In: Journal of Information Technology in Construction (ITcon), ISSN 1874-4753, E-ISSN 1874-4753, Vol. 13, p. 408-420.
    • Bergström, Mattias ; Ericson, Åsa ; Larsson, Madelene ; Nergård, Henrik ; Larsson, Tobias ; Renström, Boo. (2008) Needs as a basis for design rationale. In: / [ed] Dorian Marjanovic, Mario Storga, Neven Pavkovic, Nenad Bojcetic, University of Zagreb, Dubrovnik, Croatia: University of Zagreb , 2008, 8 p.
    • Bertoni, Marco ; Bordegoni, Monica ; Johansson, Christian ; Larsson, Tobias. (2008) Pilot specifications definition guidelines for the implementation of a KEE solution in the aeronautical domain. 6 p. In: CIRP Design Conference 2008 / [ed] Fred J. A. M. van Houten, Laboratory of Design, Production and Management, Faculty of Engineering Technology, Univ. of Twente , 2008.
    • Larsson, Andreas ; Larsson, Tobias ; Isaksson, Ola ; Bylund, Nicklas. (2008) Rethinking virtual teams for streamlined development. In: Virtual technologies: concepts, methodologies, tools, and applications, Hershey PA: Information Science Reference, 2008. 19 p.
    • Nergård, Henrik ; Johansson, Christian ; Larsson, Tobias. (2008) Supporting decision making with agent-based modelling and simulation. In: Design 2008: 10th International Design Conference, May 19-22, 2008, Dubrovnik, Croatia / [ed] Dorian Marjanovic; Mario Storga; Neven Pavkovic; Nenad Bojcetic, Zagreb: University of Zagreb , 2008, p. 1191-1198.
    • Eriksson, Johan ; Nybacka, Mikael ; Larsson, Tobias ; Lindgren, Per. (2008) Using Timber in a multi-body design environment to develop reliable embedded software. In: Intelligent vehicle iniative (IVI) technology controls and navigation systems, 2008. Warrendale, PA : SAE, 2008. 8 p. (SP / Society of Automotive Engineers, SAE; 2193). DOI: https://doi.org/10.4271/2008-01-0742.
  • 2007 (12)
    • Nybacka, Mikael ; Larsson, Tobias ; Ericson, Åsa. (2007) Collaboration in winter vehicle testing – real-time simulations boosting innovation opportunities. In: Trends in computer aided innovation: 2nd IFIP working conference on computer aided innovation / [ed] Noel León-Rovira, Encyclopedia of Global Archaeology/Springer Verlag, 2007, p. 211-220. DOI: https://doi.org/10.1007/978-0-387-75456-7_21.
    • Nybacka, Mikael ; Larsson, Tobias (2007) Distribuerad simulering och visualisering av fordonsdynamik i realtid.. In: Svenska Mekanikdagar 2007 : Program och abstracts. Luleå : Luleå tekniska universitet, 2007. p. 92 (Research Report / Luleå University of Technology; 2007:10).
    • Ericson, Åsa ; Larsson, Tobias ; Åström, Peter (2007) Functional product innovation – reaping the benefits of simulation driven design. In: Knowledge Sharing and Collaborative Engineering: Proceedings of Fourth IASTED International Conference on Knowledge Sharing and Collaborative Engineering, KSCE 2006 / [ed] M. Boumedine; C. Touzet, ACTA Press, 2007. 6 p.
    • Ericson, Åsa ; Larsson, Tobias ; Larsson, Andreas (2007) In search of what is missing – needfinding the SIRIUS way. In: Proceedings of the Fourth IASTED International Conference on Knowledge Sharing and Collaborative Engineering: November 29 – December 1, 2006, St. Thomas, US Virgin Islands / [ed] M. Boumedine; C. Touzet, Anaheim: ACTA Press, 2007, 6 p.
    • Johansson, Christian ; Larsson, Andreas ; Larsson, Tobias.(2007) Knowledge enabled engineering – knowledge lifecycle approach. In: Svenska Mekanikdagar 2007 : Program och abstracts. Luleå : Luleå tekniska universitet, 2007. p. 102 (Research report / Luleå university of technology; 2007:10).
    • Larsson, Tobias ; Isaksson, Ola. (2007) Knowledge engineering for functional product innovation. Conference: National Workshop on Functional Products – Development and Sales, No. 2, Luleå, Sweden, October 24, 2007 – October 25, 2007.
    • Ericson, Åsa ; Larsson, Tobias ; Larsson, Andreas ; Larsson, Madelene (2007) Need driven product development in team-based projects.. In: Design for society: knowledge, innovation and sustainability ; ICED ’07 – Paris, 16th International Conference on Engineering Design ; 28 – 30 August 2007, Paris, France, 11 p.
    • Larsson, Tobias ; Larsson, Madelene (2007) NeedInn – behovsdriven produktutveckling inom E-hälsa. Luleå : Luleå tekniska universitet, 2007. 60 p.
    • Larsson, Tobias ; Ericson, Åsa. (2007) Needs as a foundation for life-cycle commitments. Conference: National Workshop on Functional Products – Development and Sales, No. 2, Luleå, Sweden, October 24, 2007 – October 25, 2007.
    • Ericson, Åsa ; Bergström, Mattias ; Johansson, Christian ; Larsson, Tobias. (2007) On the way to knowledge awareness in early design. In: The future of product development: proceeding of the 17th CIRP design conference / [ed] Frank-Lothar Krause, Berlin: Encyclopedia of Global Archaeology/Springer Verlag, 2007, p. 607-616. DOI: https://doi.org/10.1007/978-3-540-69820-3_59.
    • Ylinenpää, Håkan ; Larsson, Tobias ; Westerberg, Mats. (2007) Open approaches and methods to enable Functional Product Development. Conference: Functional Products – Development and Sales, No. 2, Luleå, Sweden, October 24, 2007 – October 25, 2007.
    • Larsson, Andreas ; Larsson, Tobias ; Bylund, Nicklas ; Isaksson, Ola. (2007) Rethinking virtual teams for streamlined development. In: Higher creativity for virtual teams: developing platforms for co-creation, Hershey, PA: Information Science Reference, 2007, p. 138-156.
  • 2006 (5)
    • Löfstrand, Magnus ; Larsson, Tobias ; Karlsson, Lennart (2006) An activity based simulation approach to functional product development. In: Challenges in collaborative engineering : CCE ’06. 2006. 10 p.
    • Sandberg, Marcus ; Larsson, Tobias. (2006) Automating redesign of sheet-metal parts in automotive industry using KBE and CBR. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference – 2006: presented at 2006 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 10 – 13, 2006, Philadelphia, Pennsylvania, USA, New York: American Society of Mechanical Engineers , 2006, Vol. 1, p. 349-357. DOI: https://doi.org/10.1115/DETC2006-99545.
    • Nybacka, Mikael ; Larsson, Tobias ; Johanson, Mathias ; Törlind, Peter (2006) Distributed real-time vehicle validation.. In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference – 2006: presented at 2006 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, September 10 – 13, 2006, Philadelphia, Pennsylvania, USA, New York: American Society of Mechanical Engineers , 2006, Vol. 3 : 26th Computers and Information in Engineering Conference, p. 805-812. DOI: https://doi.org/10.1115/DETC2006-99154.
    • Nergård, Henrik ; Ericson, Åsa ; Bergström, Mattias ; Sandberg, Stefan ; Larsson, Tobias ; Törlind, Peter (2006) Functional product development – discussing knowledge enabling technologies. In: Proceedings of Design 2006 : 9th International Design Conference, May 15-18, 2006, Dubrovnik, Croatia. University of Zagreb, 2006. p. 587-593
    • Nybacka, Mikael ; Karlsson, T. Larsson, Tobias (2006) Vehicle validation visualization.: Proceedings of Virtual Concept 2006 : Interactive Design and Manufacturing Methodologies, Tools and Processes. Springer, 2006. 7 p.
  • 2005 (10)
    • Sandberg, Marcus ; Larsson, Tobias ; Åström, Peter ; Näsström, Mats. (2005) A design tool integrating CAD and virtual manufacturing for distortion assessment. In: 15th International Conference on Engineering Design – ICED 05: 15 – 28 August 2005 / [ed] Andrew Samuel; William Lewis, Barton: Institution of Engineers, Australia , 2005, 10 p.
    • Ericson, Åsa ; Larsson, Tobias (2005) A service perspective on product development – towards functional products.. In: Proceedings of 12th International Product Development Conference : IPDM. 2005. 15 p.
    • Löfstrand, Magnus ; Larsson, Tobias ; Karlsson, Lennart. (2005) Demands on engineering design culture for implementing functional products. In: 15th International Conference on Engineering Design – ICED 05: 15 – 28 August 2005 / [ed] Andrew Samuel; William Lewis, Barton: Institution of Engineers, Australia , 2005. 15 p.
    • Larsson, Andreas ; Larsson, Tobias ; Leifer, Larry ; Van der Loos, Machiel ; Feland, John. (2005) Design for Wellbeing – Innovations for People. In: 15th International Conference on Engineering Design – ICED 05: 15 – 28 August 2005 / [ed] Andrew Samuel; William Lewis, Batyon: Institution of Engineers, Australia , 2005. 10 p.
    • Leifer, Larry ; Larsson, Andreas ; Larsson, Tobias ; Van der Loos, Machiel ; Feland, John (2005) Design for wellbeing – innovations for people. In: Human Centered Design : Maruzen for 10th anniversary of the Kanto Branch, Japanese Society of Mechanical Engineers. / ed. S Fukuda. 2005. 11 p.
    • Sandberg, Marcus ; Boart, Patrik ; Larsson, Tobias. (2005) Functional product life-cycle simulation model for cost estimation in conceptual design of jet engine components. In: Concurrent Engineering – Research and Applications, ISSN 1063-293X, E-ISSN 1531-2003, Vol. 13, no 4, p. 331-342. DOI: https://doi.org/10.1177/1063293X05060136.
    • Karlsson, Lennart ; Löfstrand, Magnus ; Larsson, Andreas ; Larsson, Tobias ; Törlind, Peter ; Elfström, Bengt-Olof ; Isaksson, Ola (2005) Information driven collaborative engineering – enabling functional product innovation.. n: Challenges in Collaborative Engineering – CCE ’05: the knowledge perspective in collaborative engineering : proceedings of the International Workshop 14th-15th April 2005, Sopron, Hungary in conjunction with DDECS ’05 / [ed] Gianni Jacucci, Adam Pawlak, Kurt Sandkuhl, Jönköping, Sweden: Department of Computer & Electrical Engineering, School of Engineering, Jönköping University , 2005.
    • Larsson, Tobias ; Larsson, Andreas ; Kassfeldt, Elisabet (2005) Innovations for Life – Design for Wellbeing.. In: First International Conference on Lifestyle, Health and Technology : June 1-3, 2005 at Luleå University of Technology, Porsön, Luleå, Sweden. 2005. 1 p.
    • Ericson, Åsa ; Nergård, Henrik ; Larsson, Tobias. (2005) Knowledge exchange challenges within the extended enterprise. In: 15th International Conference on Engineering Design – ICED 05: 15 – 28 August 2005 / [ed] Andrew Samuel; William Lewis, barton: Institution of Engineers, Australia , 2005. 14 p.
    • Boart, Patrik ; Sandberg, Marcus ; Nergård, Henrik ; Larsson, Tobias. (2005) Multidisciplinary design tool for conceptual design and evaluation. In: 15th International Conference on Engineering Design – ICED 05: 15 – 28 August 2005 / [ed] Andrew Samuel; William Lewis, Barton: Institution of Engineers, Australia , 2005. 13 p.
  • 2004 (2)
    • Bylund, Nicklas ; Isaksson, Ola ; Kalhori, Vahid ; Larsson, Tobias. (2004) Enhanced engineering design practice using knowledge enabled engineering with simulation methods. In: Design 2004: proceedings of the 8th International Design Conference, May 18 – 21, 2004, Dubrovnik – Croatia / [ed] Dorian Marjanovic, Zabreb: University of Zagreb , 2004, 6 p.
    • Sandberg, Stefan ; Kalhori, Vahid ; Larsson, Tobias (2004) FEM simulation supported knowledge enabled engineering in high strength steel car body design. In: Proceedings of the ASME Design Engineering Division – 2004: IMECE 2004, New York: American Society of Mechanical Engineers , 2004, p. 907-913, 7 p. DOI: https://doi.org/10.1115/IMECE2004-61584.
  • 2003 (2)
    • Larsson, Andreas ; Törlind, Peter ; Karlsson, Lennart ; Mabogunje, A. ; Leifer, L. ; Larsson, Tobias ; Elfström, Bengt-Olof. (2003) Distributed team innovation – a framework for distributed product development. In: Research for practice – innovation in products, processes and organisations: ICED 03, 14th International Conference on Engineering Design ; 19 – 21 August 2003, The Royal Institute of Technology, Stockholm / organized by the Royal Institute of Technology / [ed] Anders Folkeson, Glasgow: Design Research Society, 2003, p. 321-322.
    • Nyström, Mattias ; Larsson, Tobias ; Karlsson, Lennart ; Kokkolaras, Michael ; Papalambros, P.Y. (2003) Linking analytical target cascading to engineering information systems for simulation-based optimal vehicle design. In: Research for practice – innovation in products, processes and organisations: ICED 03, 14th International Conference on Engineering Design ; 19 – 21 August 2003, The Royal Institute of Technology, Stockholm / [ed] Anders Folkeson, Glasgow: Design Research Society, 2003.
  • 2002 (2)
    • Larsson, Andreas ; Larsson, Tobias ; Törlind, Peter (2002) The Mobile intranet – managing people and information in a distributed organization. In: WWDU 2002 : work with display units – world wide work. 2002. 4 p.
    • Larsson, Tobias ; Larsson, Andreas (2002) Web-based multibody dynamics using distributed simulation modules.. In: Annals of 2002 Int’l CIRP design seminar. 2th CIRP Design Seminar. Hong Kong, 2002. 8 p.
  • 2001 (5)
    • Larsson, Tobias ; Larsson, Andreas (2001) A modular approach to web based multibody dynamic simulation.; Karlsson, Lennart. In: Proceedings of 2001 International CIRP Design Seminar, Design in the New Economy. 2001. 6 p.
    • Larsson, Tobias ; Larsson, Andreas ; Karlsson, Lennart. (2001) Distributed multibody dynamic analysis within product development. In: Proceedings of the ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference DETC’01, Pittsburgh, Pennsylvania, USA, 2001, p. 501-507.
    • Larsson, Andreas ; Larsson, Tobias ; Törlind, Peter (2001) Intranet – Luleå University of Technology. Nielsen Norman Group Report: Intranet Design Annual: 10 Best Intranets of 2001. In “Intranet Design Annual – Ten Best Intranets of 2001” by Kara Pernice Coyne, Jakob Nielsen, and Candice Goodwin.
    • Larsson, Tobias. (2001) Multibody dynamic simulation in product development. Luleå : Luleå tekniska universitet, 2001. 60 p. (Doctoral thesis / Luleå University of Technology; 2001:07).
    • Larsson, Tobias (2001) Simulering av dynamiska system vid produktutveckling. In: Mekanisten. 2001 ; No. 2, p. 46-49
  • 2000 (1)
    • Drugge, Lars ; Larsson, Tobias ; Stensson, Annika. (2000) Modelling and simulation of catenary-pantograph interaction. In: Vehicle System Dynamics, ISSN 0042-3114, E-ISSN 1744-5159, Vol. 33, no suppl, p. 490-501.
  • 1999 (3)
    • Stensson, Annika ; Larsson, Tobias ; Merkt, Thomas ; Schuller, J. ; Williams, R.A. ; Mauer, L. (1999) Industry demands on vehicle development – methods and tools. In: Vehicle System Dynamics, ISSN 0042-3114, E-ISSN 1744-5159, Vol. 33, no Suppl, p. 202-213.
    • Larsson, Tobias (1999) Effective development of dynamic systems – a structured approach. Luleå : Luleå tekniska universitet, 1999. 16 p. (Licentiate thesis / Luleå University of Technology; 1999:40).
    • Drugge, Lars ; Larsson, Tobias ; Berghuvud, Ansel ; Stensson, Annika. (1999) The nonlinear behaviour of a pantograph current collector suspension. In: Proceedings of the 1999 ASME Design Engineering Technical Conferences, Las Vegas, Nevada, USA, 1999, 7 p.
  • 1998 (2)
    • Larsson, Tobias ; Drugge, Lars (1998) Dynamic behaviour of pantographs due to different wear situation. IIn: Computers in railways, VI : [Sixth International Conference on Computer Aided Design, Manufacture and Operation on the Railway and Other Advanced Mass Transit Systems, Lisbon, Portugal, 2 – 4 September 1998, 1998.
    • Johansson, Henrik ; Larsson, Tobias. (1998) Information flow and simulation support in the product development process – a case study. In: Proceedings / Produktmodeller -98. 1998. p. 271-280 (LiTH-IKP-R / Department of mechanical engineering; 1035).
  • Master thesis
    • Larsson, Tobias., Söderberg, Thommy (1996) Strömavtagare till X2000-tåg : modellering med hjälp av I-DEAS och ADAMS. Högskolan i Luleå, 1996. (Examensarbete Civilingenjörsprogrammet; 1996:164)